Paddington ensuite vanity
A floating fluted-timber vanity over honed travertine, with a hidden cistern and brushed-brass tapware in a compact ensuite.
Custom Vanities · Sydney
Bathroom vanities built to survive a wet room
Floating, wall-hung, with stone slabs and fluted timber fronts — made to the millimetre in our Chipping Norton workshop, with a fixed-price quote in seven days and a ten-year guarantee.
We'll beat any written quote — guaranteed
Made-to-measure Chipping Norton workshop 10-year guarantee
- Rated on Google 4.9 ★ · 87 Google reviews
- Established 12+ years in business
- Across Sydney 600+ projects installed
- Accreditation HIA member · Licensed
Why custom
Bathrooms are where flat-pack joinery quietly fails.
Most off-the-shelf vanities are standard MDF boxes, cut to showroom sizes and wrapped in vinyl. In a steamy, splash-prone bathroom the edges swell, the wrap peels and the doors start to sag inside a couple of years — long before the rest of the room is tired.
We build the other way around. Every vanity is drawn to your room and your plumbing, then made from moisture-tough, marine-grade substrate with sealed end-grain and brassware specified to last decades. Same small team, start to finish — measured, built and installed to the millimetre.
What's included
Specified for wet rooms, down to the screw
Every Elite Joinery vanity is built to the same standard — the details that decide whether bathroom joinery still looks right in ten years of daily use.
- 01
Marine-grade, moisture-tough carcasses
Cabinet boxes built from water-resistant substrate rated for wet areas — not the standard MDF that swells and crumbles the first time it meets a leak or steam.
- 02
Sealed edges & end-grain
Every cut edge sealed and finished so water can't wick in behind the door fronts — the single most common point where bathroom joinery starts to fail.
- 03
Stone or solid-timber tops
Engineered stone, natural stone or sealed solid timber, chosen with you in person — with the slab, cut-outs and edge profile signed off before we cut.
- 04
Soft-close on every drawer & door
Quality soft-close runners and hinges throughout (brand confirmed at quote), tested by hand so everything still closes flush years later.
- 05
Tapware & basins designed in
Cabinetry detailed around your chosen basin, mixer and waste — wall-hung or floating, with cistern, pipework and drawers planned so nothing clashes.
- 06
One fixed, itemised price
A single quote that lists exactly what's included. The price you approve is the price you pay — no variations sprung on you mid-build.
Why Elite Joinery
One workshop, one team, one price
The reasons homeowners and designers across Sydney trust us with their bathrooms and laundries.
-
The same makers, start to finish
The team who measure your bathroom build the vanity and sign off the install. Nothing is handed to a subcontractor you never meet.
-
A price that doesn't move
Your fixed-price quote lands within seven days of the measure and holds. No drip-fed extras, no surprise invoice on install day.
-
Built in our own workshop
Every vanity is cut, assembled and hand-finished in Chipping Norton — so we control the quality instead of hoping a factory got it right.
-
Backed for ten years
Every join, hinge and finish is covered by a ten-year workmanship guarantee. If something isn't right, we come back and fix it.
How we work
From first sketch to install day
A clear five-step process with a fixed-price quote — so you always know what happens next, and what it costs.
- 01 45 minutes · free
The first conversation
We talk through how you live, what isn't working and your budget — in our showroom or over a call. You leave with honest advice and no pressure.
- 02 1 hour · in-home
In-home measure
We measure on site, check services and access, and photograph the space so the design is built around your actual room — not a guess.
- 03 Within 7 days
Design & fixed quote
You receive a considered design and a single fixed-price quote. The price you approve is the price you pay — no surprises later.
- 04 4–8 weeks
In the workshop
Your cabinetry is cut, assembled and hand-finished by our team in Marrickville, with progress photos sent along the way.
- 05 1–3 days · on-site
Install day
Our installers fit everything carefully, tidy up after themselves and walk you through your finished cabinetry before they leave.
Recent vanities
Vanities we've built across Sydney
A few recent vanities and bathroom joinery projects from our workshop. Full case studies are on the way — ask us to see more from your area.
Bondi family bathroom
A double vanity with deep soft-close drawers and a continuous stone top, built to take the daily traffic of a busy household.
Newtown laundry & powder room
Full-height storage and a hard-wearing vanity that pulled laundry and powder room into one tidy, sealed run of joinery.
From Google
Reviews from recent Sydney clients
Sarah Mitchell
Mar 2025
From the first measure to install day, Elite Joinery were on time and on budget. Our new kitchen in oak and stone is exactly what we hoped for. The team are real craftspeople.
David Chen
Feb 2025
We had custom joinery built for our living room and the detailing is beautiful. They worked around our timeline and left the place spotless. Highly recommend.
Anika Patel
Jan 2025
The walk-in wardrobe Elite Joinery designed makes the most of a small space. Soft-close everything, perfect fit, and the price never changed from the quote.
James O'Brien
Dec 2024
Second project with Elite Joinery — a laundry and a bathroom vanity this time. Same care, same quality. They're our go-to for anything built-in now.
Lena Hartmann
Nov 2024
Honest advice, no upselling, and a finish you can't get from a flat-pack. The kitchen has been in for six months and still looks brand new.
Tom Reynolds
Oct 2024
The team helped us rethink the whole layout and the result is so much better than what we'd drawn ourselves. Genuinely a pleasure to deal with.
Common questions
Questions homeowners ask us
How much does a custom vanity cost?
Most of our custom vanities fall in a range we'll confirm at your consult, depending on size, materials, tops and tapware. After the in-home measure you receive one fixed, itemised quote — so you know the full cost before any work begins.
How long does a custom vanity take?
Allow roughly three to six weeks in the workshop once your design and quote are approved, plus a day or so on site for installation. We confirm exact dates with your quote and send progress photos along the way.
Will it actually hold up in a wet bathroom?
Yes — that's the point of building custom. We use moisture-tough, marine-grade substrate, seal every cut edge and end-grain, and specify finishes and hardware rated for wet areas, all backed by a ten-year workmanship guarantee.
Do you handle plumbing, tiling and stone?
We build and install the vanity and its top, and coordinate the licensed trades — plumbing, tiling and stone — so the project runs to one schedule. We'll set out clearly what's included in your quote and what sits with your own trades.
What materials and tops can I choose?
Solid timber, veneer and two-pack fronts, with engineered stone, natural stone or sealed solid-timber tops. We bring samples to your consult and help you choose finishes that suit a bathroom's daily wear and moisture.
Which parts of Sydney do you service?
We build for homes right across Sydney from our Chipping Norton workshop. If you're unsure whether we cover your suburb, send us your address through the quote form and we'll confirm.
Start your project
Let's design cabinetry your home deserves
Book a free design consultation and have a fixed-price quote in your inbox within a week.
- Free consultation
- Fixed-price quote
- 10-year guarantee